Products
-
AIRTEC INTERCOOLER UPGRADE FOR MITSUBISHI COLT CZT
AIRTEC INTERCOOLER UPGRADE FOR MITSUBISHI COLT CZT As part of our expanding Mitsubishi product range, AIRTEC Motorsport is proud to launch our intercooler upgrade suitable for track or fast road use. PLEASE NOTE- ONLY AVAILABLE IN BLACK - NOT SILVER In order to ensure there is no noticeable loss in performance during extended periods of hard driving, we have developed a larger, freer-flowing intercooler that is a direct replacement for the smaller and more restrictive OEM item. Our solution to increasing the intercooler’s size and performance within the confines of the limited space behind the bumper and crash bar is based upon a 50mm twin pass core. This offers a massive increase in overall capacity in comparison to the original intercooler, as well as a significant increase in frontal area over standard, which allows it to make the most of the air flow provided. Together with our high-flow end tanks to ensure flow is directed correctly and efficiently, the AIRTEC Motorsport intercooler offers much greater efficiency and volume over standard. The comprehensive kit includes silicone connectors and all fixtures and fittings. DYNO TESTEDStock IntercoolerIAT at air filter: 30-32*cRelative Humidity: 41%Barometric Pressure: 1,012mBar Run 1 In: 142*cOut: 68*cRun 2 In: 145*cOut: 65*cRun 3 In: 143*cOut: 66*c Max pressure drop: 0.65psi AIRTEC Motorsport IntercoolerIAT at air filter: 31-34*cRelative Humidity: 38%Barometric Pressure: 1,011mBar Run 1 In: 136*cOut: 39*cRun 2 In: 138*cOut: 41*cRun 3In: 135*cOut: 38*c Max pressure drop 1.91psi Features: Huge 50mm core Flowed end tanks High quality silicone hoses and stainless-steel jubilee clips Retains original crash bar No cutting to bumper Fitting Instructions and all required fixings Proven power increase for fast road & track AIRTEC 3-year unlimited mileage warranty Fitting will take 2-4 hours depending on mechanical skill Fits Mitsubishi Colt CZT Registered Design Right number: 6022641
£491.37 £466.80
-
AIRTEC INTERCOOLER UPGRADE FOR MK3 FOCUS ZETEC S 1.6 ECOBOOST
Deep Air-Ram scoop is the full depth of the bumper gap, to ensure Air is directed & Forced directly into the intercooler core. NOW ONLY AVAILABLE IN BLACK AIRTEC have used their fully proven 70mm bar ‘n’ plate core with tapered end tanks, this same spec has been tested @ 300+bhp and consistently provides cooling for 400+ bhp cars, maximum tests on this spec of core and tapered end tanks have also been tested to 540 bhp with an impressive 38 degree intake temperature. Features: Fully proven race spec **mm bar ‘n’ plate core design Cast alloy tapered end tanks, ensures smooth airflow with maximum strength The Unique Full depth scoop surround, encloses intercooler to force Airflow directly into race spec core. No extra hoses required, fits to standard hoses Removal of Ford Grill shutters is required, simply un-bolt and re-fit loom to AIRTEC bracket supplied Fitting should take no longer than 1-2 hours Available in Natural Silver or Pro-Series Satin Black Available with AIRTEC logo in several colours free of charge 1x Airtec Intercooler & 1 x Full depth Air Ram scoop AIRTEC part number: ATINTFO27
£504.13 £478.92
-
AIRTEC INTERCOOLER UPGRADE FOR MK4 GOLF 1.8T
TECHNICAL DATA A great upgrade for your modified Golf 1.8T, perfect for Fast Road and Track use. As fitted to AIRTEC demo car. After much research, development and testing at AIRTEC HQ, our intercooler upgrade for the VW Golf Mk4 1.8T has been added to our ever-growing range of products. Built using a high flow core to offer increased cooling efficiency and performance, we take pride ensuring all of our kits are finished to our usual high standard and premium quality. Designed in the UK and offered at a reasonable price. AIRTEC front mount intercooler kit includes these parts & features: 1 x Huge 60mm core Intercooler with flowed cast end tanks, this means less welding and a stronger Intercooler High quality 4/5ply silicon hoses with no joins (Red,Black and Blue) which means better flow inside the pipe work, finished stainless Jubilee clips Stainless horn and ambient temperature support brackets with AIRTEC logo’s Retains original crash bar ‘requires minor cutting, detailed in instructions’ Retains original fog lights No cutting to bumper Fitting Instructions and all required fixings Requires the rear of the middle grill/bumper area to be trimmed, left and right bumper grilles remain un-cut We strongley recommend Anniversary lower bumper valance to be installed to help with intercooler clearance Un-beatable value for money Proven power increase for Fast Road & Track builds Intercooler available only in Pro-Series Black AIRTEC 3 year unlimited mileage warranty Fitting will take 2-4 hours depending on mechanical skill Fits all Mk4 1.8T Golfs AMD Rolling Road tested results – Stage 1 remap ‘Higher stages of tune will see even bigger gains’ Standard – Temps Into Intercooler 128 degrees & Out of Intercooler 49 degrees, 12 bhp gain in mid range and standard Intercooler kept losing power AIRTEC Intercooler – Temps Into Intercooler 126 degrees & Out of Intercooler 23 degrees. Please note, above test results taken from Seat Cupra R rolling road testing, it uses same intercooler as the Airtec 1.8T intercooler kit, which means you will get the same great results! Approximate dimensions: Height 340mmWidth 680mmThick 60mm Registered Design Right number: 6023253 AIRTEC part no: ATINTVAG13
£631.76 £600.17
-
AIRTEC INTERCOOLER UPGRADE FOR MK6 FIESTA 1.6 TDCI
AIRTEC front mount intercooler upgrade for the Mk6 Fiesta 1.6 diesel TDCi Designed to fit all 1.6 diesel models. PLEASE NOTE: This intercooler kit will require trimming to the bumper and radiator cradle Featuring a 60mm core design together with high-flow cast end tanks, the AIRTEC intercooler offers much greater surface area, efficiency and volume over standard. Despite this improvement, it fits behind the original bumper but does require trimming and cutting to fit! The comprehensive fitting kit includes all the correct fixtures and fittings, step-by-step instructions with pictures and should take approximately 2.5 hours to complete. The intercooler is available in Pro-Series Black finish and with or without the AIRTEC logo. Features: Designed and manufactured in the UK by AIRTEC AIRTEC logo’d cast end tanks for improved airflow and unbeatable strength Proven reduction in charge temps 3-year unlimited mileage warranty Available in Pro-Series Black finish AIRTEC logo available at no extra charge Unbeatable value for money! Hose colour shown for illustraion purposes only AIRTEC part no: ATINTFO45
£445.42 £423.15
-
AIRTEC INTERCOOLER UPGRADE FOR MONDEO MK3 2.0/2.2 TURBO DIESEL
Airtec Mondeo Mk3 2.0/2.2 Turbo Diesel front mount Intercooler (comes with full brackets and fittings included) Airtec’s latest creation is this intercooler for the Mondeo 2.0 & 2.2 Turbo diesels, they have now changed the total design with new high flow 60mm core and Angled flow end tanks, which in turn has increased power, torque & also lowered ATC Temps, Yes its really that good.BHP & Torque gains on Standard car fitted with Airtec Intercooler upgrade, Rolling road carried out @ AMD. (Gains. 5.2 bhp increase & we saw the torque rise by a massive 31.5 lb/ft , this figure will be easily doubled when fitted to a remapped Mondeo.)Test results from Street Performance’s Modified Mondeo Diesel. Mods on car are : -Free Flow exhaust & decat -Pipercross panelfilter -Massive Airtec Intercooler upgrade -Custom map up to 3.3k rpmStreet Performance’s Modified Mondeo made 208bhp & 441 lbft of torque! with the above mods.Quotes by David @ Street Performance Figures are very good, even without map it does 173hp instead of 155hp.With mapping we saw the power rise up to 208hp. We did limit the car’s torque for more pull tru revs & as smooth power curve as possible (but will be raised 10-20Nm after some more fiddling with the map! along with 220+hp to make ST220/ ST225 owners jealous, with same or better performance with 40-50MPG They also tested 2 cars to see what the Intake Air charge tempertures were under load, a Complete standard car and street performance’s modified Mondeo, Both cars tested with 8 degrees Ambient Air temps, Results – Completely Standard car under load, the Intake tempertures kept rising up to 55-60° and above! Fully tuned car with the Airtec Intercooler fitted and the Intake temps never went higher then 15°, so IC works very well and gives much less stress on engine. Approximate Dimensions: Height 350mm Width 685mmThickness 60mm AIRTEC part no: ATINTFO14
£357.36 £339.49
-
AIRTEC INTERCOOLER UPGRADE FOR MONDEO MK4 1.8/2.0 DIESEL
Comes with full fitting kit and instructions included, fitting takes 1 -2 hours. Only basic tools required and you don’t have to remove Bumper to fit. Airtec’s latest creation is this intercooler for the Mondeo Mk4 1.8, 2.0, the Intercooler is made with a high flow 60mm core and Angled flowed end tanks, which in turn increase’s power, torque & also lowered ATC Temps. Best results will be seen from Re-mapped cars, but gains can be seen on standard cars. BHP & Torque gains on Standard car fitted with Airtec Intercooler upgrade will see 5 – 10 bhp & even higher gains on re-mapped cars. Approximate dimensions:Width 945mmHeight 320mmThickness 60mm AIRTEC part no: ATINTFO28
£381.61 £362.53
-
AIRTEC INTERCOOLER UPGRADE FOR MONDEO MK4 2.2 DIESEL
Comes with full fitting kit and instructions included, fitting takes 1 -2 hours. Only basic tools required and you don’t have to remove Bumper to fit. AIRTEC Motorsport ‘S latest creation is this intercooler for the Mondeo Mk4 2.2 Diesel, the Intercooler is made with a high flow 60mm core and Angled flowed end tanks, which in turn increase’s power, torque & also lowered ATC Temps. Best results will be seen from Re-mapped cars, but gains can be seen on standard cars. BHP & Torque gains on Standard car fitted with AIRTEC Intercooler upgrade will see 5 – 10 bhp & even higher gains on re-mapped cars. Dimensions:Width: 945mm Height: 320mm Depth: 60mm AIRTEC Part No: ATINTFO29
£470.95 £447.40
-
AIRTEC Intercooler Upgrade for MQB (VW / Seat / Skoda / Audi)
AIRTEC Motorsport are proud to introduce the front mount intercooler upgrade for the VAG MQB EA888.3 platform. This freer-flowing intercooler is a direct replacement for the smaller and more restrictive OEM set up. Fits the following vehicles: Volkswagen Golf Mk7/7.5 R - 2.0 TSI Volkswagen Golf Mk7/7.5 GTI incl. Clubsport and Clubsport S - 2.0 TSI Seat Leon Cupra 265/280/300 - 2.0 TSI (Now fits 2018 on wards!). Seat Leon - 1.9/2.0 TSI Audi S3 8V (Hatchback and Saloon variants) - 2.0 TSI Audi TTS 8S - 2.0 TSI Audi TT 8S - 1.8/2.0 TSI Audi A3 8V - 1.8/2.0 TSI Skoda Octavia vRS - 2.0 TSI Featuring a 60mm core design together with high-flow cast end tanks, the AIRTEC intercooler offers much greater surface area, efficiency and volume over standard. Despite this improvement, it fits neatly behind the original bumper, requires no trimming or cutting and can be used with the original hoses. As with all AIRTEC products, the intercooler was tested back-to-back on the dyno aginist the OEM item. This showed a huge reduction in air charge temperatures over standard. Our test car was fitted with a Cobra cat-back exhaust system and running Revo Stage 1 software. Stock intercooler temps reduce to an average of 64 degrees and peak at 68 degrees (after 5 back-to-back runs). On the Stage 1 Revo software, the car struggled to produce a peak power increase of 40bhp, due to the restrictive and inefficient OEM VW intercooler being unable to cool the intake temperatures effectively. With the AIRTEC intercooler fitted, the IAT saw a huge drop of 120 degrees, keeping temps much closer to ambient temperature and proving to be more reliable run after run. This gave a huge increase in performance, shown by the dyno test results below. Test results taken @ AmD Rolling road: Before AIRTEC intercooler was fitted, the car made 336.1bhp & 350.9 lb/ft of torque After the intercooler was fitted it made a very impressive 371.8bhp & 352.9 lb/ft Standard intercooler: Run 1 - IN 115 degrees, OUT 44 degrees Run 2 - IN 117 degrees, OUT 48 degrees Run 3 - IN 118 degrees, OUT 52 degrees AIRTEC intercooler: Run 1 - IN 116 degrees, OUT 18 degrees Run 2 - IN 117 degrees, OUT 20 degrees All research, design and development carried out at AIRTEC HQ in the UK, by our team of top fabricators and engineers. Extensive UK track days and multiple trips to the Nurburgring complete our well rounded development and testing programme. We strive to put all of our products through a gruelling test so we can focus on ensuring they are nothing but the very best quality, delivering you the best performance on the road and the track. Intercooler dimensions: Core thickness: 60mm Height: 418mm Intercooler width: 860mm Part no: ATINTVAG12
£759.39 £721.42
-
AIRTEC INTERCOOLER UPGRADE FOR NISSAN R35 GT-R
TECHNICAL DATA AIRTEC Motorsport front mount intercooler kit for the R35 GT-R, dedicated to offering the best cooling solution to suit up to Stage 4.5 modified GT-Rs. Designed in-house at AIRTEC HQ in the UK, this replacement intercooler kit has been carefully developed to offer a hugely effective upgrade over the original Nissan intercooler. We dedicated a lot of time and effort to testing our kits, and went through several design evolutions during the development stage. As with every product we develop, it was tested first hand on a car in a real-world environment. The development car was originally running Stage 2, but was then upgraded with after adding the AIRTEC intercooler, AIRTEC intakes (soon to be released), Milltek downpipes and 1100cc injectors, backed up with a Stage 4.25 map at GT-R specialist Kaizer Motor. The car made an impressive 667.8bhp with consistently stable charge temps. The comprehensive kit comes with all fittings and fixtures and uses the car’s original mounting points to ensure an easy, direct fit that requires no cutting, drilling or modification. Approximate Dimensions390mm Height565mm Width (not including pipes)100mm Thickness (including end tanks) Registered Design Right number: 6049894 AIRTEC part no: ATINTNIS01
£1,014.65 £963.92
-
AIRTEC INTERCOOLER UPGRADE FOR PEUGEOT 207 GTI V2
AIRTEC has now added a great addition to its growing range of performance intercoolers, in the way of this huge front mount for the 207 GTI 1.6 Turbo. New V2 design. Great addition to any standard, or remapped, 207 GTI. Features 50mm thick track proven Bar-and-Plate core, specked to AIRTEC design AIRTEC cast end tanks for improved Airflow and un-beatable strength Comes with silicone and alloy boost pipe connecting hoses – includes stainless clips Fitting takes less 2-3 hours, comes with fitting instructions 3 year unlimited mileage warranty Available in Pro-Series satin Black or Natural Silver AIRTEC logo available at no extra charge Huge surface area, but still allows plenty of airflow to top section of the radiator, this is essential for hotter climate countries. Approximate dimensions: 50mm thick 290mm height 510mm width
£504.06 £478.86
-
AIRTEC INTERCOOLER UPGRADE FOR POLO GTI & IBIZA MK4 1.8 TURBO
TECHNICAL DATA AIRTEC has released their Seat Sport Style intercooler & boost pipe kit, reasonably priced but high quality alternative from cheap nasty Ebay kits & more than capable of doing the same if not better job than more expensive intercoolers, we take a huge amount of pride in making sure our kits are finished to an extremely high standard. AIRTEC front mount intercooler features 1 x huge 60mm core intercooler with flowed cast end tanks, this means less welding and a stronger intercooler Can be adapted to suit a number of VAG applications Unbeatable value for money Proven power increases for fast road & rack Available in Satin Black or Natural Silver AIRTEC 3 year unlimited mileage warranty Can be fitted without any modifications to crash bar (Polo GTi may require very minor adjustment to top of crash bar) Fitting will take 3-4 hours depending on mechanical skill Finally an affordable option for your Polo GTi and Ibiza 1.8 Turbo Kit includes all necessary parts required to complete this front mount conversion Huge Seat Sport twin-pass style intercooler with bigger 60mm core Finished In Pro-Series Satin Black only Approximate Dimensions: Thickness – 60mm Width – 525mm Height – 378mm Please allow 2-4 weeks for delivery.
£631.76 £600.17
-
AIRTEC INTERCOOLER UPGRADE FOR RENAULT CLIO RS
Airtec has released their Renault Clio RS Front Mount Intercooler to its growing range of performance intercoolers, reasonably priced but high quality alternative from cheap nasty Ebay kits & more than capable of doing the same if not better job than more expensive Intercoolers, we take a huge amount of pride in making sure our kits are finished to an extremely high standard. Great addition to any standard or re-mapped Clio’s. AIRTEC Front mount Intercooler kit Includes these parts & Features. Perfect for any standard or remaped Clio’s 1 x Huge 60mm core Intercooler with flowed cast end tanks, this means less welding and a stronger Intercooler. High quality silicone hoses which means better flow inside the pipe work, finished stainless Jubilee clips. Retains original crash bar. Front and rear scoop for better air flow. Retains original fog lights. No cutting to bumper. Fitting Instructions and all required fixings. Proven Power Increase’s for Fast Road & Track. Available in Satin Black finish. Airtec 3 year unlimited mileage warranty. Fitting will take 2-4 hours depending on mechanical skill.
£631.76 £600.17
-
AIRTEC INTERCOOLER UPGRADE FOR S-MAX AND MONDEO MK4 2.5 TURBO
Comes with full fitting kit and instructions included, fitting takes 1 -2 hours. Only basic tools required and you don’t have to remove Bumper to fit. Airtec’s latest creation is this intercooler for the Mondeo M4 (XR5) 2.5 Turbo Petrol, they have now changed the total design with new high flow 60mm core and Angled flowed end tanks, which in turn has increased power, torque & also lowered ATC Temps, Yes its really that good.BHP & Torque gains on Standard car fitted with Airtec Intercooler upgrade will see 5 – 15 bhp & even higher gains on re-mapped cars.Perfect for cars in Hot countries like Australia etc were the Mondeo XR5 is very popular.Customers comments after fitting“Really happy with the effect of the Intercooler on my car’s performance. Running a flash tune I was experiencing some overboost issues prior to the install, but have not had any issues since” Pete from Australia. Approximate dimensions:Width 945mmHeight 320mmThickness 60mm AIRTEC part no: ATINTFO30
£470.95 £447.40
-
AIRTEC INTERCOOLER UPGRADE FOR SEAT CUPRA R
An ideal upgrade for all Cupra R’s with remapped Ecu, Perfect for Fast Road and Track use, As fitted to AIRTEC demo car. Airtec has released their Cupra R Intercooler in Pro-series Black as a Middle range price option, reasonably priced but high quality alternative from cheap nasty Ebay kits & more than capable of doing the same if not better job than more expensive Intercooler kits, we take a huge amount of pride in making sure our kits are finished to an Extremely high standard. AIRTEC Front mount Intercooler kit Includes these parts & Features 1 x Huge 60mm core Intercooler with flowed cast end tanks, this means less welding and a stronger Intercooler High quality 4/5ply silicon hose’s with alloy joiners & stainless Jubilee clips Powder coated upper bonnet catch support brackets ‘originals are removed to give extra space for fitting intercooler’ Retains original crash bar ‘un-cut’ Retains original fog lights without any modification No cutting to bumper Fitting Instructions and all required fixings Un-Beatable value for money Proven Power Increase’s for Fast Road & Track Available in Satin Black or Natural Silver Airtec 3 year unlimited mileage warranty Fitting will take 2-3 hours depending on mechanical skill Amd Rolling Road tested results – Stage 1 remap ‘Higher stages of tune will see even bigger gains’ Standard – Temps Into Intercooler 128 degrees & Out of Intercooler 49 degrees, 12 bhp gain in mid range and standard Intercooler kept losing power AIRTEC Intercooler – Temps Into Intercooler 126 degrees & Out of Intercooler 23 degrees Please note: Now comes with 1 piece silicone hoses, only supplied with 1 metal hose joiner.
£631.80 £600.21
-
AIRTEC INTERCOOLER UPGRADE FOR SEAT LEON MK1 150 DIESEL
The Airtec 150 Diesel intercooler upgrade for the Seat Leon Mk1 150PD uses our very popular Cupra R Intercooler which is capable of 400bhp, the kit comes complete with full alloy boost pipe kit, custom made silicon hoses and coolant Rad pack brackets that secure the radiator and Air-con radiator in place ‘the standard intercooler secure these in place as standard’ Seat Leon 150 Diesel – Fitting time – 3-4 hours VAG have used a front mount intercooler design as standard, This intercooler is adequate for cooling non modified vehicles, but as our tests have proven, once even a Basic remapping of the Ecu (stg1 remap) had been carried out, the Intake temperatures had risen to very high levels, which in turn leads to power loss. By fitting a Bigger more efficient Airtec Intercooler the Intake temperatures are kept constantly cooler, keeping your Engine safe and your power to the maximum! The Airtec Intercooler makes the Charged Air (Intake Temps) cooler so you gain Horse power, its really that simple! Results taken @ Amd Essex – Running standard map and then remapped with Amd Stage1 TEST RESULTS: Hot side -Into Intercooler from Turbo & Cold side – Out of Intercooler into engine Airtec Intercooler standard remap Run1 – Hot side 135 degrees C & Cold side26 degrees C Run2 – Hot side 128 degrees C & Cold side23 degrees C Run3 – Hot side 130 degrees C & Cold side25 degrees C AIRTEC Intercooler Amd re-map Run1 – Hot side 162 degrees C & Cold side 28 degrees C Run2 – Hot side 156 degrees C & Cold side 26 degrees C Run3 – Hot side 158 degrees C & Cold side 26 degrees C The Airtec Intercooler really comes into its own when used on more modified vehicles, even bigger BHP gains could be seen on serious spec car which include, full exhaust, turbo upgrades etc, these modifications put serious strain on the cooling ability of the stock Intercooler, and you could be losing in excess of 30 bhp! Just by keeping you standard Intercooler fitted Lower Intake temperatures & Gain BHP! Reduced Boost Pressure Drop Full Aluminium design 60mm bar & plate performance Intercooler core Larger than standard Diameter silicon Boost hoses, in a choice of colours 1x cnc machined boost pipe joiner Moulded end tanks instead of Restrictive Plastic pressed end tanks these can leak Full comprehensive step by step fitting Instructions No extra Pipe work or additional parts required and more Importantly no cutting to bumper or fog light removal! Pressure tested to over 5 bar No additional turbo lag will be experienced, due to our flowing end tank design
£893.34 £848.67
-
AIRTEC INTERCOOLER UPGRADE FOR SKODA FABIA VRS, SEAT IBIZA MK4 AND VW POLO 1.9 PD130 DIESEL
AIRTEC Motorsport Intercooler Upgrade for Skoda Fabia VRS, SEAT Ibiza Mk4 and VW Polo 1.9 PD130 Diesel Airtec has released their Seat Spot Style Intercooler & boost pipe kit, reasonably priced but high quality alternative from cheap nasty Ebay kits & more than capable of doing the same if not better job than more expensive Intercoolers, we take a huge amount of pride in making sure our kits are finished to an Extremely high standard Finished In Pro-Series Satin Black - please note no longer available in silver AIRTEC Front mount Intercooler Features 1 x Huge 60mm core Intercooler with flowed cast end tanks, this means less welding and a stronger Intercooler Can be adapted to suit a number of VAG applications Un-Beatable value for money Proven Power Increase’s for Fast Road & Track Available in Satin Black or Natural Silver Airtec 3 year unlimited mileage warranty Fitting will take 3-4 hours depending on mechanical skill Please allow 2-4 weeks for delivery.
£601.68 £571.60
-
AIRTEC Intercooler Upgrade for Transit Connect 1.0 / M Sport 1.0
AIRTEC Front mount Intercooler Features 1 x Twin pass huge 60mm core Intercooler with flowed cast end tanks, this means less welding and a stronger Intercooler Comes with full fitting instructions & pipe work No cutting bumper with our intercooler kit Un-Beatable value for money Available in Satin Black only Airtec 3 year unlimited mileage warranty Fitting will take 1-2 hours depending on mechanical skill Finished In Pro-Series Satin Black or Natural Silver Proven horizontal 60mm core, runs left to right of the end tanks this gives the single pass design intercooler the shortest route for the charged air to pass though, with such a small turbo, the faster the charged air can get in & out the better. Another great must have with our design is making full use of the hottest part of the intercooler, which is the top section, this is on full show allowing maximum Airflow. Tip, more of the grill can be opened up with Dremel or Drill to allow even more Airflow to the intercooler, we suggest to do this whilst fitting. Proven and tested at Collins Performance with great results! Standard intercooler:62 Degrees AIRTEC Stage 1 Intercooler:44 Degrees AIRTEC Stage 2 intercooler:20 Degrees AIRTEC intercooler will fit 100PS / 125PS / 135PS and 140PS (Red and Black) models. Please note: Pipework only available in silver Approximate Dimensions: Thickness – 60mm Width – 525mm Height – 378mm Intercooler Volume Capacity (The amount of charged air that the intercooler can hold)AIRTEC: 3.45 litres AIRTEC part no: ATINTFO47
£445.42 £423.15
-
AIRTEC INTERCOOLER UPGRADE FOR TRANSIT CONNECT M SPORT
AIRTEC front mount intercooler for the Transit Connect M Sport. please note- this is no longer available in Blue hose, now only in Black hose colour. Features 60mm thick track proven bar and plate core done to AIRTEC design AIRTEC Cast end tanks for improved airflow and unbeatable strength Comes with alloy boost pipe and silicone connecting hoses including stainless clips Fitting takes approximately 2-3 hours, comes with fitting instructions 3 year unlimited mileage warranty AIRTEC Logo available at no extra charge Air ram scoop to feed air directly into the intercooler Over 50% bigger than the stock intercooler Registered Design Right number: 6023449 AIRTEC part no: ATINTFO46
£542.42 £515.30
-
AIRTEC Intercooler Upgrade for Transit Custom & M-Sport (EURO 6)
Replaces very restrictive standard OEM intercooler, for an AIRTEC's high-flow, 90mm core intercooler WILL fit the EURO 6 M Sport Custom Features 90mm thick proven bar and plate core, specked to AIRTEC design AIRTEC logo'd Cast end tanks for improved Airflow and un-beatable strength Dyno proven, gain BHP 'Results coming soon' Lower intake temps means safer engines 'FACT' Fitting takes 1-2- hours 3 year unlimited mileage warranty Available in Pro-Series Black only (not silver) AIRTEC logo available at no extra charge Unbeatable value for money Fits new Transit Custom Euro 6 & M-Sport Approximate Dimensions: Height 140mm Width 676mm Core Thickness 110mm AIRTEC part no: ATINTFO5
£446.52 £424.30
-
AIRTEC INTERCOOLER UPGRADE FOR VAUXHALL ADAM 1.4 TURBO
AIRTEC front mount intercooler for Vauxhall Adam 1.4T Designed to work with re-mapped ECU for best results Finished in Pro-Series Satin Black with a choice of silicone hose colours Removes restrictive OE Vauxhall intercooler, which suffers from heat soak on tuned cars. AIRTEC Front mount Intercooler kit Includes these parts & Features 1 x Huge 80mm core Intercooler with flowed cast end tanks, this means less welding and a stronger Intercooler ‘same a VXR design’ High quality 4/5ply silicon hose’s with alloy joiners & stainless Jubilee clips Fitting Instructions and all required fixings Un-Beatable value for money Proven Power Increase’s for Fast Road & Track Available in Pro-Series Satin Black Airtec 3 year unlimited mileage warranty Fitting will take 2-3 hours depending on mechanical skill Registered Design Right number: 6023243 AIRTEC part no: ATINTVAUX11
£567.95 £539.55
-
AIRTEC INTERCOOLER UPGRADE FOR VAUXHALL ASTRA J 1.4 GTC
TECHNICAL DATA AIRTEC front mount intercooler features 1 x huge 70mm intercooler core, with flowed cast end tanks, this means less welding and a stronger intercooler Air-ram scoop which forces cold air directly into the intercooler core Comes complete with alloy pipes and silicon hoses, includes stainless jubilee clips Un-beatable value for money Proven power increase, ideal for fast road & track use Available in Pro-Series Black with black silicone hoses AIRTEC 3 year unlimited mileage warranty Fitting will take 3-4 hours depending on mechanical skill Approximate Dimensions Width – 740mm Height – 170mm Thick – 70mm Registered Design Right number: 6030022 Silicone Hoses & Intercooler are black by default, logo colour is customisable AIRTEC part no: ATINTVAUX13
£567.95 £539.55
-
AIRTEC INTERCOOLER UPGRADE FOR VAUXHALL ASTRA J 1.6 GTC
TECHNICAL DATA AIRTEC has now added a great addition to its range of products in the way of this intercooler for the Astra Mk6 J 1.6 Turbo AIRTEC front mount intercooler features: 1 x Huge 70mm Intercooler core, with flowed cast end tanks, this means less welding and a stronger Intercooler Air-ram scoop which forces cold air directly into the intercooler core Comes complete with alloy pipes and silicon hoses, includes stainless jubilee clips Un-Beatable value for money Proven power increase for Fast Road & Track builds Available in Pro-Series Black only AIRTEC 3 year unlimited mileage warranty Fitting will take 3-4 hours depending on mechanical skill We have an intercooler kit available for both Astra J 1.4 & 1.6 GTC AIRTEC part no: ATINTVAUX6
£567.95 £539.55
-
AIRTEC INTERCOOLER UPGRADE FOR VAUXHALL ASTRA J VXR
TECHNICAL DATA AIRTEC has now added a great addition to it’s growing range of performance intercoolers, in the way of this huge front mount for the Astra J VXR. Outperforming the competition, including the more expensive alternatives! Fully comprehensive intercooler kit designed in the UK and offered at a fantastic price. We take pride in ensuring our products are finished to an extremely high standard. Great upgrade to any standard or remapped Astra J VXR. AIRTEC front mount intercooler kit includes these parts & features 1 x Huge 60mm core Intercooler with flowed cast end tanks, this means less welding and a stronger Intercooler 63mm pipework 2.5″ this pipework has been proven to flow up to 650 bhp High quality 4/5ply silicon hose’s with Pro series black or alloy joiners & stainless Jubilee clips Powder coated intercooler support brackets Fitting instructions and all required fixings Un-beatable value for money Proven power increase for Fast Road & Track builds Available in Pro-Series Black AIRTEC 3 year unlimited mileage warranty Fitting will take 2-3 hours depending on mechanical skill Approximate dimensions Height 385mm Thickness 60mm Width 660mm Hose colour shown for illustraion purposes only Registered Design Right number: 6023464 AIRTEC part no: ATINTVAUX5
£829.52 £788.04
-
AIRTEC INTERCOOLER UPGRADE FOR VOLVO C30 AND V50 T5 PETROL
AIRTEC’s front mount intercooler for the Volvo C30 T5, developed in house at AIRTEC HQ, the HUGE 90mm core and smooth flowing end tanks has been tested and proven to lower intake temps. Bolts onto the bottom of the radiator cradle so there isn’t major weight added onto the standard radiator mounts like other alloy intercoolers on the market. Still as easy to fit and improved high-flow design. Comes with full brackets and all fixtures and fittings included. Intercooler available in natural silver or Pro-Series satin black finish for that ultimate stealth look. Optional big boost pipe kit only available in black. Will also fit: Volvo V50 T5 & S40 T5 TESTEDStandard Volvo C30 intercooler:Run 1129 degrees – Inlet Temp57 degrees – Outlet Temp Run 2130 degrees – Inlet Temp59 degrees – Outlet Temp AIRTEC intercooler:Run 1115 degrees – Inlet Temp20 degrees – Outlet Temp Run 2122 degrees – Inlet Temp24 degrees – Outlet Temp Run 3120 degrees – Inlet Temp23 degrees – Outlet Temp Dimensions:Width: 325mmHeight: 165mm Depth: 90mmCapacity: 4.8 litres Registered Design Right number: 6022636 AIRTEC part no: ATINTVOL1
£454.68 - £812.35
You have seen 144 out of 10090 products